GUNS AND NOZZLES RS 2000
The RS 2000 gun is ergonomically shaped and it makes the work much easier thanks to its low weight (its cover is from light anti-abrasive mass). The cover is supplied for right-handed or left-handed people. The nozzles come in the following sizes: 6,4 7,8 9,5 a 12,7 mm. A wide range of equipment with different nozzle types and diameters makes it possible to use different abrasives for different types of blasting cabins as well.
NOZZLES FOR PRESSURE CABINS
The nozzle accelerates the flow of abrasive, which results in better blasting. If you want to blast effectively, use high-quality, proven nozzles to ensure fast blasting with low air consumption. Nozzles and nozzle holders for pressure cabins are supplied in required diameters ranging from 6.4 to 12.7 mm. Nozzles are of high quality material (borcarbide) and feature a long service life. The outer diameter of the blasting hose is decisive for the nozzle holder.
RUBBER GLOVES FOR THE CHAMBER
Special rubber gloves for the blast cabin are made of highly resistant rubber. The gloves are 60 cm long and can be fitted into the cabin rosettes or can be used freely.
Allow to blow out the product with compressed air after blasting in the cabin. The gun is connected to the cabin and it is an important helper in the cabin.
They are made of soft quality rubber and, in the absence of tightly fitted rubber gloves; they prevent the abrasive from leaking through the hand holes in the cabin. They are always supplied in a couple
The turntable allows easier handling of the product inside the cabin. The table is usually perforated, its size is adapted to the size of the cabin and it can be equipped with e.g. automatic rotation. If you want to blast heavier or bigger parts, you will appreciate the side-movement table that will allow you to load parts into the cabin e.g. with a forklift truck or crane.
FOILS FOR THE CABIN - PROTECTION OF THE WINDOW
Protection of the safety glass is provided with anti-blasting foil. The foil is made of special antistatic materials, does not bind dust particles and helps to maintain visibility inside the cabin. It is supplied according to the type of the cabin in the required size..
RUBBER INSIDE COVERING OF THE CABIN
This is an important element for increasing the service life of the entire blasting cabin. Not only it protects the cabin body but it also dampens the subsequent reflection of the abrasive and thus extends the life of all the cabin elements, such as the protective foil of the window. Special Rubber in the thickness of 6 mm is glued to the base of the cabin - black coloured rubber, the rubber is enhanced by abrasion protection. The required size can be ordered in a maximum size of 1,000 x 1,000 mm or smaller.