Injector Cabins

DSC 1776

Injection blasting cabins are designed for professional blasting especially with light abrasives (corundum, glass beads, plastic abrasive). They are mainly used for blasting stainless steel, aluminium, copper, duralumin, glass, but they can also be used for blasting iron.  They work on the principle of a fixer, whereby a light abrasive is sucked in by the vacuum, mixed with the compressed air in the gun and then it is blasted onto the blasted surface. These cabins are ergonomically designed for a whole-day work and emphasize blasting comfort to ensure high performance and quality of treated surfaces.

PRESSURE CABINS

tryskací kabina

Pressure blasting cabins are designed for professional blasting with all kinds of available abrasives (steel grit, steel granulate, corundum, garnet, glass beads, plastic abrasive, slag, etc.). They are used in all industries - the engineering industry, automotive, aerospace, foundry and timber industries, where wood elements can be blasted to highlight "annual rings" or imitate old furniture.

ACCESSORIES FOR BOTH INJECTOR AND PRESSURE CABINS

To buy all the accessories, please use our e-shop.

Are you looking for spare parts or equipment that you miss? A lot of parts are variable in cabs, and it also fits into other manufacturers' cabs. Contact our sales department that will be happy to help you choose the right piece.


The most popular blasting cab accessories

GUNS AND NOZZLES RS 2000

GUNS AND NOZZLES RS 2000
The RS 2000 gun is ergonomically shaped and it makes the work much easier thanks to its low weight (its cover is from light anti-abrasive mass). The cover is supplied for right-handed or left-handed people. The nozzles come in the following sizes: 6,4 7,8 9,5 a 12,7 mm. A wide range of equipment with different nozzle types and diameters makes it possible to use different abrasives for different types of blasting cabins as well.

NOZZLES FOR PRESSURE CABINS

NOZZLES FOR PRESSURE CABINS
The nozzle accelerates the flow of abrasive, which results in better blasting. If you want to blast effectively, use high-quality, proven nozzles to ensure fast blasting with low air consumption. Nozzles and nozzle holders for pressure cabins are supplied in required diameters ranging from 6.4 to 12.7 mm. Nozzles are of high quality material (borcarbide) and feature a long service life. The outer diameter of the blasting hose is decisive for the nozzle holder.

RUBBER GLOVES FOR THE CHAMBER

RUBBER GLOVES FOR THE CHAMBER
Special rubber gloves for the blast cabin are made of highly resistant rubber. The gloves are 60 cm long and can be fitted into the cabin rosettes or can be used freely.

BLOWGUNS

BLOWGUNS
Allow to blow out the product with compressed air after blasting in the cabin. The gun is connected to the cabin and it is an important helper in the cabin.

RUBBER ROSETTES

RUBBER ROSETTES
They are made of soft quality rubber and, in the absence of tightly fitted rubber gloves; they prevent the abrasive from leaking through the hand holes in the cabin. They are always supplied in a couple

TURNTABLE

TURNTABLE
The turntable allows easier handling of the product inside the cabin. The table is usually perforated, its size is adapted to the size of the cabin and it can be equipped with e.g. automatic rotation. If you want to blast heavier or bigger parts, you will appreciate the side-movement table that will allow you to load parts into the cabin e.g. with a forklift truck or crane.

FOILS FOR THE CABIN - PROTECTION OF THE WINDOW

FOILS FOR THE CABIN - PROTECTION OF THE WINDOW
Protection of the safety glass is provided with anti-blasting foil. The foil is made of special antistatic materials, does not bind dust particles and helps to maintain visibility inside the cabin. It is supplied according to the type of the cabin in the required size..

RUBBER INSIDE COVERING OF THE CABIN

RUBBER INSIDE COVERING OF THE CABIN
This is an important element for increasing the service life of the entire blasting cabin. Not only it protects the cabin body but it also dampens the subsequent reflection of the abrasive and thus extends the life of all the cabin elements, such as the protective foil of the window. Special Rubber in the thickness of 6 mm is glued to the base of the cabin - black coloured rubber, the rubber is enhanced by abrasion protection. The required size can be ordered in a maximum size of 1,000 x 1,000 mm or smaller.

FILTERING UNITS FOR THE CABINS

The filtering unit is a very important part of the blasting cab, because it ensures correct separation of the abrasive and good visibility inside the cabin.

+420 577 018 482 | This email address is being protected from spambots. You need JavaScript enabled to view it.

About Us | Product range | Air Technology | Second hand | References | News | Contact
© 2016 - Website designed and created by AGENTura Weboo s.r.o.